YUSUF TOPCU +90 532 441 91 63
[email protected]

Gentiger GT-875-5AX


  • Finishing Time: 7 H 36 M
  • Material: Aluminum
  • Tool: R2, R3


Rigid Structure

The Gentiger GT-875-5AX features T-shape machine structure, exhibiting superior rigidity. The width of column is the same as the base. The table is independently installed on the base and is fully supported through the entire stroke. This machine offers high speed, maximum stability and high precision, providing a competitive edge in small type precision mold and die machining.

High Quality Cast Iron Multiple Treatments

The structural parts of GT-875-5AX are manufactured from high quality cast iron, stress relived and seasoning treated for the deformation-free performance year after year.

Roller Type Linear Guide Ways on Three axes

Precision roller type linear guide ways on 3 axes achieve high loading resistance, high rigidity and long service life. Another benefit is that the machine provides the best dynamic accuracy at high feedrate.

Rigid Roller type Linear Guide Way

The use of extra heavy duty, high speed roller type linear guide ways provides outstanding features; such as low thermal growth, low noise, extra low surface pressure and excellent lubrication effect. The linear way effectively suppresses thermal growth and features long life and remains maintenance free for a long time.

3Cutting feed rate on 3 axes: 20 m/min
Rapid feed rate on 3 axes: 45 m/min
Positioning accuracy: 0.005 mm / Full Stroke. (ISO-230-2)
Repeatability accuracy: < 0.004 mm / Full Stroke. (ISO-230-2)


Travel (X / Y / Z) 820mm / 750 mm / 500mm
Cutting Feedrate 20 m/min
Rapid Feedrate 45 m/min
Table Area Ø600 sq.500
T-slot N°5 width 14 / 100 mm
Height Of Table From Ground 985 mm
Distance From Spindle Nose To Table Surface 100 ~ 600 mm
Max. Load Of Table (Average Load) 500 kg
Max. Spindle Speed 15,000 rpm
Type Of Spindle Motor Direct Drive
Bearing Lubrication Grease
Spindle Cooling Oil Cooling
Spindle Taper BT-40
Spindle Motor 10 / 17 kw
Spindle Torque 63.7 / 108.6 Nm
Spindle Bearing Ins.diameter Ø70 mm
Atc Capacity 30 tools
Atc Tool System BT-40
Max. Tool Diameter Ø76 mm
Max. Tool Length 300 mm
Max. Tool Weight 7 kg
Motor Of Tool Magazine 375 w
Servo Motor For 5 Axes 8.6 kw(X) / 5.6 kw(Y) / 5.1 kw(Z) / 5.0 kw(A) / 2.3 kw(C)
Air Pressure Requirement 7 kgf/cm2
Air Conditioner 750 w
Spindle Cooler 1.2 kw
Automatic Lubricator (Slideways) 150 w
Coolant Motor 2 kw
Chip Flush Motor 2 kw
Total Power Consumption(Max.) 55 kw
Coolant Tank Capacity 434 Liter
Machine Dimension 3,880 x 3,087 x 3,300 mm
Packing Dimension 4,082 x 3,000 x 3,900 mm
Machine Net Weight 13,400 kg
Machine Gross Weight 15,000 kg

*Other spindle speed also available with this machine.


  • Coolant system
  • Work lamp
  • Toolbox
  • Spindle air blow system
  • Chip air blow device
  • Air conditioner for electrical cabinet
  • MPG
  • M30 work end indication light
  • Full enclosed splash guard
  • Automatic lubrication system
  • Operaation and maintenance manual
  • Leveling bolts and pads
  • Internet function
  • Spindle heat compensation system
  • Screw chip conveyor and cart
  • A,C axis optical scale
  • Two screw chip conveyor equipped at the base
  • Coolant inner 3 axes ballscrew


  • 3 axes optical scale
  • Oil skimmer
  • Oil-mist cooling system
  • Auto tooling measurement
  • Coolant through spindle
About the Author