Gentiger GT-2516V
Comments : Off
- Finishing Time:
- Material: Aluminum
- Tool: R5 ball nose cutter
- Finishing Time:
- Material: NAK80 (HRC40)
- Tool: R4 ball nose cutter
Feature:
Optimal Machine Structure
The model GT-2516V is a double column structurd design for high speed machining. The table is independently installed on the base and fully supported by 3 roller-type linear guideways through the entire stroke, assuring maximum accuracy and dependability. The columns are one-piece constructed for extra high rigidity.
Lifetime Accuracy
All castings are stress relieved and seasoning treated for long term accuracy and long service life.
Three Axes Linear guide Way
Roller type linear guide ways on three axes feature higher federate, resist heavier loads and ensure superior dynamic accuracy and a long service life. X-axis is equipped with 3 linear guide ways for superior rigidity.
Three axes are driven by powerful servo motors. Its strong power can reduce machining time for large molds and increase profitability.
Three axes feedrates :
Rapid feedrates 20/18/20 m/min.
Cutting feedrates 20/18/20 m/min.
Three axes are equipped with Heidenhain optical scales.
Positioning accuracy: 0.006mm/Full Stroke. (ISO-230-2).
Repeatability : < 0.004mm/Full Stroke. (ISO-230-2).
Cutter balance should be calibrated to within G2.5.
Sepcification:
| MODEL | T10 | T15 | S24A |
|---|---|---|---|
| Travel (X / Y / Z) | 2,500 x 1,600 x 700 / 800 mm (Opt.) | ||
| Cutting Feedrate (X / Y / Z) | 20 x 18 x 20 m/min | ||
| Rapid Feedrate (X / Y / Z) | 20 x 18 x 20 m/min | ||
| Table Area | 2,800 x 1,600 mm | ||
| T-Slot | 22 x 210 x 8 mm | ||
| Height of Table from Ground | 980 mm | ||
| Max. Height of Working Piece | 700 / 1,000 mm (Opt.) | ||
| Distance from Spindle Nose to Table Surface | 300 ~ 1,000 mm / 250 ~ 1,050 mm (Opt.) | ||
| Max. Load of Table (Average Load) | 10,000 kg | ||
| Max. Spindle Speed | 10,000 rpm | 15,000 rpm | 24,000 rpm |
| Type of Spindle Motor | Direct Drive | Direct Drive | Built-in |
| Bearing Lubrication | Grease | Grease | Oil-Air |
| Spindle Cooling | Oil-Cooling | Oil-Cooling | Water-Cooling |
| Spindle Taper | BT / BBT-50 | BT / BBT-50 | HSK-A63 |
| Spindle Motor | 22 kw | 22 kw | 30/39 kw |
| Spindle Torque | 140 Nm | 140 Nm | 29.1/38.7 Nm |
| Spindle Bearing Ins.Diameter | Ø90 mm | Ø90 mm | Ø65 mm |
| ATC Capacity | 20 tools / 40 tools (Opt.) | ||
| ATC Tool System | BT / BBT-50 | BT / BBT-50 | HSK-A63 |
| Max. Tool Diameter | Ø133 mm | Ø133 mm | Ø100 mm |
| Max. Tool Length | 300 mm | 300 mm | 250 mm |
| Max. Tool Weight | 15 kg | 15 kg | 7 kg |
| Total Power Consumption (Max.) | 50 KVA | ||
| Coolant Tank Capacity | 1170 Liter | ||
| Controller | SIEMENS | ||
| Servo Motor for 3 Axes | X: 21.99 kw / Y, Z: 10 kw | ||
| Machine Dimension | 7,290 x 3,580 x 3,724 mm | ||
| Packing Dimension | 7,800 x 3,800 x 4,000 mm | ||
| Machine Net Weight | 30,000 kg | ||
| Machine Gross Weight | 33,000 kg | ||
* SIEMENS control is standard. HEIDENHAIN, FANUC and MITSUBISHI control are optional.
* Various door height or Y axis 3 linear guideways of SRG65 is available for option.
* Above specifications are subject to change without prior notice.
STANDARD ACCESSORIES
- Coolant tank
- Work lamp lamp
- Tool box
- Coolant motor
- Coolant system
- Spindle air blow system
- Chip air blow device
- Air conditioner for electrical cabinet
- MPG
- M30 work end indication lamp
- Spindle cooling system
- Caterpillar chip conveyor and cart
- Operation and maintenance manual
- Leveling bolts and pads
- Helix chip conveyors along side working table
- Network function
- X,Y,Z axis optical scale
OPTIONAL ACCESSORIES
- Oil and lubricant separator
- Oil-mist cooling system
- Auto tool measurement system
- Auto workpiece measurement system
- Coolant through spindle device
