THIS DOMAIN AND WEBSITE FORSALE
PLEASE CONTACT WITH
YUSUF TOPCU +90 532 441 91 63
yusuf@yucin.com
01
KAS
2016

Gentiger GT-1614V

gentiger-gt-1614v

Feature:

Rigid Structure

The Gentiger GT-1614V features T-shape machine structure, exhibiting superior rigidity. The width of column is the same as the base. The table is independently installed on the base and is fully supported through the entire stroke. This machine offers high speed, maximum stability and high precision, providing a competitive edge in small type precision mold and die machining.

High Quality Cast Iron Multiple Treatments

The structural parts of GT-1614V are manufactured from high quality cast iron, stress relived and seasoning treated for the deformation-free performance year after year.

Roller Type Linear Guide Ways on Three axes

Precision roller type linear guide ways on 3 axes achieve high loading resistance, high rigidity and long service life. Another benefit is that the machine provides the best dynamic accuracy at high feedrate.

Screw Chip Conveyor

There is one screw chip conveyor each equipped at each side of base, delivering chips to a chip conveyor for exhasusting chips out of the machine.

Specification:

MODEL T10 T15 S24A
Travel (X / Y / Z) 1,400 x 1,600 x 600 / 700 mm (Opt.)
Cutting Feedrate (X / Y / Z) 20 x 18 x 20 m/min
Rapid Feedrate (X / Y / Z) 20 x 18 x 20 m/min
Table Area 1,500 x 1,600 mm
T-Slot 22 / 200 x 8 mm
Height of Table from Ground 880 mm
Max. Height of Working Piece 1,600 x 1,800 x 600 / 850 mm (Opt.)
Distance from Spindle Nose to Table Surface 300 ~ 900 mm / 320 ~ 1,020 mm (Opt.)
Max. Load of Table (Average Load) 5,000 kg
Max. Spindle Speed 10,000 rpm 15,000 rpm 24,000 rpm
Type of Spindle Motor Direct Drive Direct Drive Built-in
Bearing Lubrication Grease Grease Oil-Air
Spindle Cooling Oil-Cooling Oil-Cooling Water-Cooling
Spindle Taper BT / BBT-50 BT / BBT-40 HSK-A63
Spindle Motor 22 kw 11/14.5 kw 30/39 kw
Spindle Torque 140 Nm 74/130 Nm 29.1/38.7 Nm
Spindle Bearing Ins.Diameter Ø90 mm Ø70 mm Ø65 mm
ATC Capacity 20 tools / 40 tools (Opt.)
ATC Tool System BT / BBT-50 BT / BBT-40 HSK-A63
Max. Tool Diameter Ø133 mm Ø100 mm Ø100 mm
Max. Tool Length 300 mm 250 mm 250 mm
Max. Tool Weight 15 kg 7 kg 7 kg
Total Power Consumption (Max.) 58 kw
Coolant Tank Capacity 400 Liter
Controller SIEMENS
Servo Motor for 3 Axes X: 15.7 kw / Y, Z: 10 kw
Machine Dimension 4,665 x 4,605 x 3,610 mm
Packing Dimension 5,350 x 4,000 x 3,700 mm
Machine Net Weight 22,500 kg
Machine Gross Weight 24,500 kg

*Other spindle speed also available with this machine.

STANDARD ACCESSORIES

  • Coolant system
  • Work lamp
  • Toolbox
  • Spindle air blow system
  • Chip air blow device
  • Air conditioner for electrical cabinet
  • MPG
  • M30 work end indication light
  • Full enclosed splash guard
  • Central control lubricator
  • Operation and maintenance manual
  • Leveling bolts and pads
  • Internet function
  • Spindle heat compensation system
  • Caterpillar chip conveyor and cart
  • 3 axes optical scale
  • Two screw chip conveyor equipped at the base

OPTIONAL ACCESSORIES

  • Oil skimmer
  • Oil-mist cooling system
  • Oil fumes extractions
  • Auto tooling measurement
  • Coolant through spindle
  • Chain type 40 ATC unit
  • Transformer
  • Z axis stroke 700 mm
About the Author